Diamond Enthusiast

|
Miss Laurie, Try the speed test at bandwidth.com to verify the speed indicated when you log on to your dial-up service. If you have a 56K modem and your speed isn't up to snuff, then try this article: How to maximize your dial-up speed in four easy stepsWith the speed (or lack thereof) you claim, you may see this answer in a couple of days! Perhaps others can respond with other suggestions before you get here. 
|
| |
| Posts: 8087 | Location: in the backwoods of North Carolina | Registered: 06-07-02 |    |
|
Diamond Enthusiast Enthusiast of the Year

|
Some local phone companies, when installing a 2nd phone line will "split" a single line instead of installing a 2nd line. Using a switch, this will create two acceptable voice lines, but the data transfer capability is cut in half. When this is done, the maximum data transmission speed is 26,400 bps, regardless of the modem speed. You can read the details about this here (look at the third paragraph): http://www.ili.net/techtips/56k.htmlAlso, I notice you're from Montana. This paragraph (from the site noted above) may be of interest to you: Another problem occurs when a phone line is stretched beyond 3 miles. You must be within 3 miles of your Central Switching Station (where all of your home calls are routed by the phone company). Call your operator and ask where your Central Switching Station is. Two conditions here apply, the phone line can be no longer than 3 miles for the k56 technology to work. If you live 3 miles from the Central Switching Station, but your phone line doesn't go in a strait line and its is over 3 miles, it is unlikely to work. For some reason the effective range of k56 is 3 miles. You can drive to the location the operator gave you, on your way home watch the odometer. If it is less than three miles that is good. I hope this is of some help!
|
| |
| Posts: 4343 | Location: Anchorage, AK | Registered: 06-05-02 |    |
|