I have a memory card manager error message that keeps popping up with every start up. I do not know how to get rid of it.

Message as follows:
_________________________________
Memory card manager:

failed to locate supported files or there is no photos found on this device.
________________________________________

I have no idea what it means or how it effects my computer.

Here is my computer information as requested in the sticky note.


Operating System System Model
Windows XP Home Edition Service Pack 2 (build 2600) Compaq Presario 061 EL424AA-ABA SR1703WM NA610 0n31411RE101AMBEM00
System Serial Number: (edited out)
Enclosure Type: Desktop
Processor a Main Circuit Board b
1.80 gigahertz AMD Sempron
128 kilobyte primary memory cache
256 kilobyte secondary memory cache Board: ASUSTek Computer INC. Amberine M 1.03
Bus Clock: 200 megahertz
BIOS: Phoenix Technologies, LTD 3.13 11/15/2005
Drives Memory Modules c,d
80.01 Gigabytes Usable Hard Drive Capacity
61.96 Gigabytes Hard Drive Free Space

IDE-CD CDRW7352 [CD-ROM drive]

Dell USB Mass Storage USB Device [Hard drive] -- drive 2
HDS728080PLAT20 [Hard drive] (80.03 GB) -- drive 0, s/n PFD255S2D22BDJ, rev PF2OA28A, SMART Status: Healthy
LEXAR JUMPDRIVE USB Device [Hard drive] (123 MB) -- drive 1 224 Megabytes Installed Memory

Slot 'A0' has 256 MB
Slot 'A1' is Empty
Slot 'A2' is Empty
Slot 'A3' is Empty
Local Drive Volumes

c: (NTFS on drive 0) 72.54 GB 60.31 GB free
d: (FAT32 on drive 0) 7.47 GB 1.66 GB free


Thanks for any tips with this problem

quote:

LEXAR JUMPDRIVE USB Device [Hard drive] (123 MB) -- drive 1 224 Megabytes Installed Memory

This is a memory card.

If you have a digital camera and have connected it or a memory card from the camera to the computer, that may also be what the computer is looking for.

Often, this type of message comes up when the memory card had an opened file and it was disconnected without first closing the files. The computer keeps looking for the files that were open when the card was disconnected.

You can resolve this type of problem by connecting the memory card to computer and opening it, open a file or folder, then close the file or folder and disconnect the memory card device.

Before disconnecting the Hardware device, look down by the clock (lower right side of the screen) for the Hardware Device removal icon. Click it and then select your device and and click "Close" You will see a pop-up window telling you that it is now safe to remove the device.

See this picture: click

I hope this helps!

Dwight

it may be starting automatically if thats the case in the run box type msconfig and shut it down in the startup area. im not good at explaining things maybe some body can explain it better than me. or the files and or drivers for the card is missing in witch case just reinstall the software.