Diamond Enthusiast


|
It depends on what the existing finish is. If it is varathane, no finish is needed. If it is varnish, you may find a simple wax looks pleasing and gives some protection. If it is shellac, which is unlikely unless it is a very old home, it should be stripped and refinshed. Shellac is soft and stains if water is left on it for more than an instant.
Nothing will protect hardwood from dings because wood (even hardwood) is soft. But varathane will protect it from minor scratches. Varnish is softer and more brittle, so it needs a little help from a good 'hard' wax finish. (Varnish is just paint minus the opaque pigment, but with semi-opaque color added in a range of yellows, reds and browns.)
You can test for shellac in an inconspicuous place. Rub a small spot with a little alchol. This dissolves shellac but not varnish or varathane.
There's no solvent test to tell if it's varathane or varnish, but varnish tends to crack or chip. That's why a hard paste wax is good protection. If you notice little chips and cracks here and there, it's probably varnish.
The pledge wipe will not offer protection, but is cosmetic only. If you like the look of the floors as they are, don't bother with a pleadge wipe.
|
| |
| Posts: 6406 | Location: British Columbia, Canada | Registered: 06-11-02 |    |
|