Hi! In my opinion, these rabbit cages that are around 32"x20"x21" seem too small for a rabbit. I mean, some breeds of rabbit get as large as 20 lbs. Then, there are the Dwarf rabbits that only get 3-4 pounds. They might fit in a cage like this, but, what about the bigger breeds? In the cage, you have the rabbit, a log or something else for it to chew on, a food bowl, a water bowl/bottle...When you consider all that, it really seems too small for a rabbit. I've never had a rabbit, but, want to get one. Is a cage around 32"x20"21" big enough for a rabbit? If not, what size cage should I get? Thank you!
-Trinity
Posts: 320 | Location: Texas USA | Registered: 06-28-02
If this is your first rabbit...may I encourage you to check the link out below. On the left side of the screen midway down is a list of topics on rabbit care.
Many people like to give their rabbits more room by litter box training them, so that they can have the freedom of the house. I have read several different web sites on litter box use. There is a strong advisory against the use of wood products as a choice of litter due to the wood having been previously treated with processing chemicals, which emits fumes. There is also a warning on the use of aromatic wood shavings; the oils tend to be toxic to small animals. They also caution against the use of clay litters whether scented or unscented as well as corncob litters. Rabbits have the tendency to ingest products in litter box. Both clay and corncob will cause bowel blockage. Every one of the sites has recommended a product called … Carefresh You can find CareFresh on the shelf at Petsmart.
According to one of my MAIN reference books, (Rabbits Rabbits Rabbits)by Pennstate Agricultural 4-H guide to raising rabbits...
"Although cages can be made of many materials, the ideal cage is all wire. Use 1/2-by-1-inch, 14-gauge welded wire for the floor. Fourteen-gauge wire is strong enough to support an 8 to 10 pound mature doe and her litter in a 30-by-30-inch cage. For the sides and top wire, you can use 1-by-2-inch, 16-gauge wire. (A solid floor is recommended for rabbits weighing over 10 pounds)..." heavier rabbits are more prone to develop sore hocks when put on a wire cage floor
"When building a cage, the 1/2-inch side of the wire should be toward the rabbit. This gives the rabbit more support for the pads of its feet and helps to prevent sore hock problems. It is important to remember that galvanized wire is rough on one side. Be sure there are no rough edges in contact with the rabits. The smoth side should always be toward the rabbit"
Also, there's a box that says:
"The size of the cage varies with the size of the breed: Length x Width x Height
Small Breeds (Dwarf): 24" x 24" x 16"
Medium Breeds: 30" x 30" x 18"
Large Breeds: 48" x 30" x 18"
My best suggestion to you would be a cage that is no longer from front to back than your arm is long when your hand is in a fist. Definetely no deeper than that...
Width is completely optional, as is height. However I would suggest the measurements suggested above, as they are the minimum that you should probably have.
Any other questions, please email me
Posts: 437 | Location: Western PA, USA | Registered: 06-03-02
In my opinion, these rabbit cages that are around 32"x20"x21" seem too small for a rabbit. I mean, some breeds of rabbit get as large as 20 lbs. Then, there are the Dwarf rabbits that only get 3-4 pounds. They might fit in a cage like this, but, what about the bigger breeds? In the cage, you have the rabbit, a log or something else for it to chew on, a food bowl, a water bowl/bottle...When you consider all that, it really seems too small for a rabbit.
