Ok, first I am novice. This is the 1st time installing a MoBo. So speak in laymens terms. I purchased a ABIT NF7-s AMD ATX nVIDIA nFORCE2 MoBo and a AMD 2800+ processor. After installing this I put in the 512 Dual DDR of memory, plugged in all power supplys,graphic, sound etc. Checked everything several times and still will not boot up. Just get blank screen. Does anyone have any suggestions? Also the power supply is only 250W. Could that be the problem? Thanks for any help.
Posts: 1 | Location: redding,ca. usa | Registered: 06-03-03
sortz, I'm not an expert here, but here's my opinion. With the processor and board you installed, I would have used a minimum of 350w ATX power supply, it could very well be the problem. That could solve the problem.
chris
Posts: 820 | Location: Wytheville, va. USA | Registered: 09-03-02
