hey i just bought a new router for my xbox live and im trying to install it. In the manual it says to go to go to ur web brouser and put this in "http://192.168.0.1" in order to open the config website to install the router. Can someone help me??

P.S the router version is the D-Link Di-604

Hi 21
Welcome to the Pool
The correct address is http://192.168.0.1.com
You missed the ".com" out (link is down BTW )
But disregard that address, go to this page...
Look carefully at this page and find out what revision number your router(A,B,C) or E is. (Different Processors) then click the picture which your looks like. Then on the next page there is a choice of Firmware(drivers) 2 or 3 links (I'd go for the most recent date)
NOTE The Links are labelled "FTP://" and Should start a wizard to get a 1st time install
File size on all these drivers is 896K
Tell us how you get on? Thanks

Thanks it didnt say anything about the .com
but the site is down so ill wait a phew days for it.and the manual is very helpful thanks for ur help.

Hi 21
The link I posted is the Makers site not a 3rd party site.So the info is Good
I noticed that the Manual is also there as an "Acrobat" link

Greetings 21.... the address of 192.168.0.1 is a valid router address for the D-Link router. I have both a D-Link DI-614+ and also a Linksys BEFSR41 router & it's I.P. address is 192.168.1.1 All you have to do is open up your favourite web browser (I.E., Firefox..etc.), type in the router's address where you would normally type in the web page. Under the "User Name", type in admin (case sensitive - all lower case), then click on the "OK" button. Do NOT enter anything in the password section. This will take you to the setup wizard.
Good Luck

My son does not realize that he should thank people for their help. The problem arose when he was trying to get into xbox live with the router. It seems that the problem was not the router but a mistake in sending the mac # for the xbox. My isp fixed it for us.
Tks from both of us.

No problem farang glad that it's been resolved...